|
Model |
HW-S5300-HI-8P2E2F |
HW-S5300-HI-8P2E2F-L2 |
|
Interface |
8*10/100M PoE ports ; 2*10/100/1000M RJ45 ports 2*1000M SFP slot ports 2 sets of V+, V- redundant DC power interface (Phoenix terminal) |
8*10/100M PoE ports ; 2*10/100/1000M RJ45 ports 2*1000M SFP slot ports 1*Console RS232 control port 2 sets of V+, V- redundant DC power interface (Phoenix terminal) |
|
POE Port |
Port 1 - 8 support PoE @ IEEE802.3af/at |
|
|
Network Protocol |
IEEE802.3 10BASE-T IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX/FX; IEEE802.3ab 1000Base-TX IEEE802.3z 1000Base-FX IEEE802.3x |
|
|
PoE Standard |
IEEE802.3af/at |
|
|
Ethernet Port Feature |
Port 1-8: 10/100BaseT(X),Auto-sensing, Port 9-10: 10/100/1000BaseT(X), auto-sensing;Full/half duplex MDI/MDI-X self-adaption |
|
|
Fiber Port Feature |
Gigabit SFP Port (Fiber module is not included, need to order separately, module options include single/multi mode, single/dual fiber, LC) |
|
|
Forwarding Mode |
Store and Forward (Full wire speed) |
|
|
Switching Capacity |
5.6Gbps (Non-blocking) |
64Gbps (Non-blocking) |
|
Forwarding Rate@64byte |
4.17Mpps |
|
|
MAC |
16K |
|
|
Buffer Memory |
4M |
|
|
Twisted Pair Transmission |
10BASE-T : Cat3,4,5 UTP(≤100 meter) 100BASE-TX : Cat5 or later UTP(≤100 meter) 1000BASE-TX : Cat5 or later UTP(≤100 meter) |
|
|
Optical Cable |
Multi Mode: 850nm 0-550M Single Mode: 1310nm 0-40KM , 1550nm 0-120KM. |
|
|
Power Supply Pin |
Default: 1/2(+), 3/6(-); Optional: 4/5(+), 7/8(-) |
|
|
MAX / AVERAGE Power Per Port |
30W/30W |
30W/30W |
|
LED |
Power indicator: PWR (green);Network indicator: Link/Act (yellow); optical port indicator: F (green); POE operation indicator: PoE (green); rate indicator: Speed (green) |
|
|
Reset Button |
N/A |
Yes,support one key to restore factory settings. |
|
Supporting Power Supply |
The matching power supply is not supported by default. If you need it, please refer to the accessory information in this specification. |
|
|
Operation TEMP / Humidity |
-40~+75°C;5%~90% RH, Non-condensing |
|
|
Storage TEMP / Humidity |
-40~+85°C;5%~95% RH, Non-condensing |
|
|
Dimension |
270*181*44.5mm |
|
|
Net /Gross Weight |
<1.7kg/<2.2kg |
|
|
Lightning protection / protection level |
Lightning protection: 4KV 8/20us;Protection level: IP40 IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge IEC61000-4-3(RS):10V/m(80~1000MHz) IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s IEC61000-4-9(pulsed magnet field):1000A/m IEC61000-4-10(damped oscillation):30A/m 1MHz IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV IEC61000-4-16(common-mode transmission):30V; 300V,1s FCC Part 15/CISPR22(EN55022):Class A IEC61000-6-2(Common Industrial Standard) |
|
|
Mechanical Feature |
IEC60068-2-6(Anti-Vibration) IEC60068-2-27(Shock resistance) IEC60068-2-32(Free falling) |
|
|
Certification |
3C;CE mark, commercial; CE/LVD EN60950; FCC Part 15 Class B; RoHS |
|
|
Warranty |
industrial PoE swith 5 years, lifelong maintenance. |
|
|
Managed Series Feature |
||
|
Interface |
IEEE802.3X (Full duplex) Broadcast storm control based on port speed Speed limit of the message flow in the access port. The minimum particle size is 64Kbps. |
|
|
PoE Management |
Distribution for PoE output power of each port PoE working status Delay start of power supply Scheduling of PoE operation and time |
|
|
VLAN |
4K VLAN based on port, IEEE802.1q VLAN based on protocol QinQ configuration |
|
|
Port Aggregation |
LACP Manual aggregation Max 6 aggregation groups and max 8 port per group |
|
|
Spanning Tree |
STP(IEEE802.1d) RSTP(IEEE802.1w) MSTP(IEEE802.1s) |
|
|
Multicast |
IGMP Snooping v1/v2/v3, Max 64 multicast groups Fast log out MLD Snooping v1/v2 Multicast VLAN |
|
|
Mirroring |
Bidirectional data mirroring based on port |
|
|
QoS |
Diff-Serv QoS 8*Output queues of each port 802.1p/DSCP priority mapping Queue Scheduling Algorithm (SP,WRR,SP+WRR) Priority Mark/Remark |
|
|
ACL |
L3-L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range and VLAN etc. |
|
|
Security |
Port Isolation Broadcast Storm Control Port-MAC Binding, IP-MAC-Port Binding |
|
|
DHCP |
DHCP Relay DHCP Client DHCP Snooping |
|
|
Management and Maintenance |
Web Management (HTTPS) SNMP V1/V2C/V3 One-key recovery NTP Login Record |
|
Skype
