Model

HW-IP60-48

Output

Group of Output

1

DC Voltage

48V DC

Default Output Voltage

48.00-48.2V （VIN: 220VAC / LOAD: 0A）

Output Rated Current

1.25A

Output Current Range

0-1.25A

Output Rated Power

60W

Total Peak Output Power

Up to 90W(Sustainable time 10S/220VAC)

Peak Output Current

1.5A( Sustainable time 10S/220VAC)

Ripple noise

Peak - Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz)

Output Regulation Range

DC47～56V

Stabilized Voltage Precision

±1% (@ 90-264Vac input, 100% load)

Line Regulation

±0.5% (@ 90-264Vac input, 100% load)

Load Regulation

±1% (@ 90-264Vac input, 100% load)

Temperature Coefficient

±0.03%/℃

Output Start Time

< 1.5S @ 115VAC

Output Hold Time

> 20ms @ 115VAC,
> 125 ms @ 230Vac (100% load )

Voltage Overshoot

≤5%

Input

Input Voltage Range

90~264VAC

Input Rated Voltage Range

100~240VAC

Frequency Range

47Hz~63Hz

Rated Frequency

50/60Hz

Starting Voltage

90V AC 

Efficiency

> 85.0% @ 115Vac, > 89.0% @ 230Vac

Input Current

< 1.40A @ 115Vac, < 0.80A @ 230Vac

Inrush Starting Current

< 20A @ 115Vac,
< 35A @ 230Vac

Power Factor

PF>0.6 (at full load)

Protection

Output

Over power

78~97W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)

Over voltage

57~70V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.

Over current

1.5～1.875A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)

Short circuit

It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit.

Operation Environment

Operation Temperature and Humidity

-40～70℃;  20%～95%RH

Storage Temperature and Humidity

-40℃~85℃;  10%~95%RH non-condensing

Libration

Frequency range: 10 ~ 500Hz,

Acceleration: 2G,

Each sweep cycle 10min.

Six sweeps along the X, Y, and Z axis

Surge

Acceleration: 20G,

Duration time: 11mS,

Three shocks along X, Y and Z axis

Altitude

2000m

Safety and EMC Standard @25℃

Security Standard

GB4943/EN60950  

■Reference  □Certification

Dielectric Strength

Input—Output:3KVAC/10mA;

Input--Case:1.5KVAC/10mA;

Output---Case:0.5KVDC/10mA

Time for each testing is 1min.

Grounding Test

Test Condition: 32A/2min; Ground bond: ＜0.1 ohms.

Leakage Current

Input to GND ≤3.5mA; Input to output ≤0.25mA  (Input 264Vac, 63Hz)

Insulation Resistance

Input—Output: 10M ohms;

EMI

Conducted Interference

EN55022, EN55024, FCC PART 15 CLASS B

Radiated Interference

EN55022, EN55024, FCC PART 15 CLASS B

Harmaonic current

EN61000-3-2  CLASS D

EMS

Conducted Emission

EN61000-4-6 Level3

Radiated Emission

EN61000-4-3 Leve3 criterion B

Power Frequency Emission

EN61000-4-8 Level3

Electrostatic Emission

EN61000-4-2 Level4 criterion B

EFT

EN61000-4-4 Level4 criterion B

Surge

EN61000-4-5 Level4 criterion B

Dip and Interruption

EN61000-4-11

Dimension (L*W*H)

93*102.5*41mm